Anchoring in a busy anchorage

While learning to anchor during my RYA Yachtmaster training we practiced in wide open spaces with few boats around to worry about. However working as a charter skipper it was necessary to anchor in much busier locations with many boats crammed into small bays.

Anchoring in a busy bay is somewhat akin to parking a car in a crowded lot — it requires skill, patience, and a good understanding of your vessel’s dimensions and behaviour. For sailors, finding a spot in a bustling anchorage not only means securing a place to rest but also ensuring that your vessel remains safe and does not become a hazard to others. Here’s a step-by-step guide on how to anchor your sailing boat efficiently and courteously in a crowded setting.

1. Assess the Anchorage: Before you approach, use binoculars to scout the anchorage from a distance. Look for natural features like protection from prevailing winds and observe the arrangement of already anchored boats. Pay attention to the types of anchors other boats are using and how they are positioned. This will give you a clue about the bottom conditions and anchoring gear that is most effective in that area.

2. Choose the Right Spot: Selecting the right spot to drop anchor is crucial. You need a location that offers enough space for your boat to swing with the wind and tide without bumping into other vessels. A general rule of thumb is to maintain at least a boat length or two from the nearest boat, depending on the size of your vessel and the density of the area. Also, consider depth and tide changes to ensure that your boat remains afloat and stable at all times.

3. Prepare Your Anchor: Before you make your approach, ensure your anchor and rode (the line and/or chain connecting the anchor to your boat) are ready to deploy. Check that the anchor is not tangled and that the rode is sufficient in length to provide adequate holding power for your depth. A good rule for anchoring is to use a scope ratio of 5:1, meaning if the water is 10 meters deep, you should let out 50 meters of rode.

4. Approach Slowly: Maneuver into your chosen spot with caution and at a slow speed. Keep an eye on nearby boats and any potential underwater hazards. Communicate with your crew clearly about roles and expectations as you prepare to anchor.

5. Drop Anchor: Once in position, slowly lower your anchor — do not throw it, as this can tangle the rode. Allow your boat to drift back slightly with the wind or current; this helps lay the anchor chain on the seabed and provides better holding. Once you have let out enough rode, gently reverse your engine to set the anchor into the seabed. Watch for signs of dragging.

6. Verify Your Anchor’s Hold: After setting the anchor, take landmarks or use a GPS anchor watch to monitor your position for a while before settling down. This is crucial to ensure your anchor is not dragging and your boat remains securely in place.

7. Be Neighborly: Once anchored, keep an eye on the space between your boat and others. If the wind or current changes, you might need to adjust your position. Always be ready to communicate with your fellow boaters, whether to alert them of potential issues or to respond to their concerns.

Conclusion:

Anchoring in a busy anchorage doesn’t have to be a stressful experience. With proper planning, awareness, and consideration for others, you can ensure a safe and pleasant stay for yourself and those around you. Remember, good anchoring is as much about being a courteous neighbour as it is about mastering the technical aspects of handling your boat.